12 – 24 Long Die & Cool Plug Change

Installation Steps

Die Install

1. Make sure die check list has been completed before installing new die.
2. Line die up with die stand and begin installing die, once die is in the die, wiggle the die by hand till the die is far enough back to get the long bolts trough the rear end plate into the die.
3. Using 4 bolts in a X pattern, pull the die in by tightening the bolts in evenly until the die is pulled all the way in
4. Remove long bolts and add anti-seize to all regular bolts, place all regular bolts back in the rear end plate and tighten in a crisscross pattern.