7. Attempt to move the corrugator downstream by Travel Rev. While doing this step, watch the mold blocks CAREFULLY, especially the ones closest to the front of the corrugator. If the mold blocks move backwards at all then STOP!!! When mold blocks are forced to rotate in reverse, major damage to the blocks, carriers, and quick returns can occur. If this happens contact Maintenance or the Supervisor on shift. Once approved by Maintenance or Supervisor to start up then go to step 8. If the mold blocks don’t move backwards under stress, continue to move the corrugator downstream. (Picture 1.8)
Picture 1.8
8. Once pipe is out, refer to Start-up procedure or Shut down procedure.
